Instructions for scanning a blade
1. Remove the blade steel from the skate boot
2. Place the blade steel on its side on the scanner glass, horizontally along the long side of the glass, with the heel to the right. Either side of the blade may face down.
3. Open the BLADE ANALYSIS tool and press the settings icon (gear) in the top right corner
4. Press "Find scanners" and select your scanner from the list (the scanner must be on the same WiFi network)
5. Close the settings and press the "Scan your blade" button
6. Optionally give the blade a name so you can identify it later in the results
7. Press "Analyze blade" — Blade Test will show the precise blade profile and evaluate its quality